01
Li-Tube Clamps
LITŠOANTŠISO TŠEBELE
| Thepa | Polypropylene(PP) | Polyamide 6(PA 6) | A luminium |
| Botenya | 0.906 g/cm² | 1.12-1.15 g/cm² | 2.65g/cm² |
| Ho kheloha ha Flexural | 36N/mm² | 130---200N/mm² | 70N/mm² |
| Impact Khanyetso | ha ho kgefutso | ha ho kgefutso | |
| Matla a Khatellang | 90N/mm² | 120N/mm² | HBS00-60N/mm² |
| Modulus ea Matla a ho hlasimolla | 1500N/mm² | 3000N/mm² | 70.000N/mm² |
| Matla a tšepe | 25-35N/mm² | 80-90N/mm² | 180N/m㎡ |
| Temp.Khanyetso | -30+90%C | 40-+120C | 300 ℃ |
| Mmala | botala | ntsho |
TAELO KHOUTU
Likhoutu tsa odara tsa likarolo tse le 'ngoe le lisebelisoa li na le sistimi ea yuniti bakeng sa letoto lohle, e fapaneng feela ka har'a khoutu ea letoto.
LIKELETSO TSE KHOTHATSENG BAKENG SA HO KENYA CLAMP
Tube od | Libaka tsa li-clamps |
6-14 | 0.9 |
15-22 | 1.2 |
23-28 | 1.5 |
30-38 | 2 |
40-48.3 | 2.5 |
50-57 | 3 |
60.3-70 | 3.4 |
73-88.9 | 3.7 |
90-108 | 4 |
114.3-133 | 4.3 |
140-165.1 | 5 |
168.3-220 | 5.5 |
219.1-323.9 | 6.5 |
356-406 | 7.5 |
Ha setsoe kapa ho kobeha ho tšehetsoa ke li-clamps, li-clamps li lokela ho behoa haufi-ufi ka hohle kamoo ho ka khonehang lehlakoreng le leng le le leng la bend.
KOPANO TAELO
Ho bokana holim'a lipoleiti tsa tšepe Weld tšepe tjheseletsa lipoleiti holim'a ho boima fetotsoeng base.Clip ka tlaase halofo ea clamp holim'a poleiti tjheseletsa le kenya tube; ebe u eketsa clamp-half ea bobeli, 'me u tiise ka likurufu tse fanoeng. U SE KE UA tjheseletsa letlapa la polasetiki sebakeng!
ho kenngoe ka sekoaeloa ka borakete e tiisang. Kenya linate tsa terene ka har'a terene 'me u thinye moo e tla ea teng.(Etsa bonnete ba hore sebaka se nepahetse). Wedge holim'a clamp-half e tlase, kenya tube, eketsa halofo ea bobeli 'me u tiise ka likurufu tse fanoeng.
Kopano ea kaho
Weld holim'a poleiti ea welding kapa ts'ehetso ea seporo, kapa u fafatse ka borakete ea ho lokisa. Wedge holim'a clamp-half e ka tlaase, kenya tšupu, eketsa clamp-half e ka holimo 'me u tiise ka li-fixing screws.(Fixing screw to jut out.)Ka ho kenya poleiti e notlelang karolong e ka holimo ea clamp, screw fixing e thibeloa ho sotha. Ebe u beha clamp ea bobeli ea tube ka tsela e ts'oanang.
Kopano ea liphaephe tse kobehileng
Ha o kopanya setsoe, o lokela ho ts'oaroa ka kotloloho ka liphaephe tse hloahloa tse ka pele le ka morao ho setsoe. Ho khothalletsoa hore lintlha tse joalo tsa ts'ehetso li lokela ho ba maemong a tsitsitseng.
Ho tiisa torque ea liboutu le axial clamping force on pipe
Matla a ho thiba ha shaft ho phala (ho ea ka DIN 3015 karolo ea 10) ke boleng bo tloaelehileng, bo baloang ho tloha ho litekanyetso tsa liteko tse 3. Nakong ea teko, phala ea tšepe ea St37 ho latela DIN 2448 e sebelisitsoe. Thempereichara e ne e le 23C 'me ho ne ho e-na le khohlano e tsitsitseng phala. Peipi e ka har'a clamp e ke ke ea thella ha e le tlas'a matla a teko a thathamisitsoeng (F) ka lehlakoreng la axial la pipe.
Letoto la leseli | |||||
Letoto la boholo | Ho lokisa liboutu GB5782-86 | Polypropylene | Nylon 6 | ||
Torque e tiisang bolt (Nm) | Matla a ho koala liphaephe F(KN)) | Torque e tiisang bolt (Nm)m) | Matla a ho koala lipeipi F(KN) | ||
0 | M6 | 8 | 0.6 | 10 | 0.6 |
1 | 8 | 1.1 | 10 | 0.7 | |
2 | 8 | 1.3 | 10 | 0.8 | |
3 | 8 | 1.4 | 10 | 1.6 | |
4 | 8 | 1.5 | 10 | 1.7 | |
5 | 8 | 1.9 | 10 | 2.0 | |
6 |
| 2.0 | 10 | 2.5 | |
