01
Tuubada Isku-qabsiga
HANTIDA ALAAB AH
| Guryaha | Polypropylene (PP) | Polyamide 6 (PA 6) | Aluminium |
| Cufnaanta | 0.906 g/cm² | 1.12-1.15 g/cm² | 2.65 g/cm² |
| leexashada Jilicsan | 36N/mm² | 130---200N/mm² | 70N/mm² |
| Iska caabinta Saamaynta | nasasho ma leh | nasasho ma leh | |
| Xoog isku dhejisan | 90N/mm² | 120N/mm² | HBS00-60N/mm²² |
| Modul ee barti | 1500N/mm² | 3000N/mm² | 70.000N/mm²² |
| Xoogga Jilicsan | 25-35N/mm² | 80-90N/mm² | 180N/m㎡ |
| Kuleyl. iska caabin | -30+90%C | 40-+120C | 300 ℃ |
| Midabka | cagaar | madow |
koodka dalbashada
Koodhadhka dalabka ee qaybaha hal-abuurka ah iyo qalabyada ayaa leh nidaam halbeeg ah dhammaan taxanaha, kaas oo kaliya ku kala duwan koodka taxanaha ah.
MASAAFADA LAGU SOO TALIYEY EE RABKA CUQDAANKA
Tube od | Masaafada xirmooyinka |
6-14 | 0.9 |
15-22 | 1.2 |
23-28 | 1.5 |
30-38 | 2 |
40-48.3 | 2.5 |
50-57 | 3 |
60.3-70 | 3.4 |
73-88.9 | 3.7 |
90-108 | 4 |
114.3-133 | 4.3 |
140-165.1 | 5 |
168.3-220 | 5.5 |
219.1-323.9 | 6.5 |
356-406 | 7.5 |
Marka xusulka ama laacida lagu taageerayo xajinta, xajintu waa in ay meel dhigaan sida ugu dhow ee suurtogalka ah dhinac kasta oo laabta.
TILMAANTA GOLAHA
Ku xidhka biraha alxanka taarikada alxanka oo ku dheji saldhig miisaan la hagaajiyay. Ku dheji badhkii hoose ee saxanka alxanka oo geli tuubo; dabadeed ku dar badhka labaad oo ku xidh boolal la bixiyay. HA ku alxan balaastigga booska!
in lagu xidho xidhidh. Geli lawska tareenka tareenka oo u leexo ilaa inta uu u socdo.(Hubi in kala fogaantu ay sax tahay) Gooji qaybta xajinta hoose, geli tuubo, ku dar badhka labaad oo ku dheji bilal la bixiyay.
Shirka dhismaha
Ku alxadid saxan alxanka ama taageerada tareenka, ama ku xidh birta wax hagaajinaysa. Ku dhufo xajinta-badhka hoose, geli tuubo, ku dar xajinta-badhka sare oo ku dheji furayaasha hagaajinta. Kadibna ku dheji xajinta tuubada labaad si isku mid ah.
Isku xirka tuubooyinka qaloocan
Marka la ururinayo xusulka, waa in si toos ah loogu hagaajiyaa tuubooyin xirfad leh oo xagga hore iyo xagga dambe ee suxulka. Waxaa lagu talinayaa in dhibcaha taageerada ah ay noqdaan meelo go'an.
Adkeynta qulqulka boolalka iyo xoogga axial ee tuubada
Awoodda xajinta ee usheeda dhexe ee tuubada (sida laga soo xigtay DIN 3015 qaybta 10) waa celcelis ahaan qiimaha, kaas oo laga soo qaatay qiyamka 3 imtixaan. Inta lagu jiro tijaabada, tuubo birta St37 sida ku cad DIN 2448 ayaa la isticmaalay. Heerkulku wuxuu ahaa 23C waxaana jiray khilaaf taagan tuubada. Tuubbada ku dhex jirta xajintu ma simbiriirixi doonto marka lagu daro xoogga tijaabada ah ee liiska (F) ee jihada axial ee tuubada.
Taxane iftiin leh | |||||
Taxanaha cabbirka | Hagaajinta boolal GB5782-86 | Polypropylene | Nayloon 6 | ||
Xawaaraha adag ee Bolt (Nm) | Xooga tuubada isku xidhka F(KN)) | Xawaaraha adag ee Bolt (Nm)m | Xooga tuubada isku dhufashada F(KN) | ||
0 | M6 | 8 | 0.6 | 10 | 0.6 |
1 | 8 | 1.1 | 10 | 0.7 | |
2 | 8 | 1.3 | 10 | 0.8 | |
3 | 8 | 1.4 | 10 | 1.6 | |
4 | 8 | 1.5 | 10 | 1.7 | |
5 | 8 | 1.9 | 10 | 2.0 | |
6 |
| 2.0 | 10 | 2.5 | |
