01
IiClamps zeMibhobho
IIPROPATI ZOMNTU
| Iipropati | Polypropylene(PP) | I-Polyamide 6(PA 6) | I-aluminium |
| Ukuxinana | 0.906 g/cm² | 1.12-1.15 g/cm² | 2.65 g/cm² |
| I-Flexural Deflection | 36N/mm² | 130---200N/mm² | 70N/mm² |
| Ukuchasa impembelelo | akukho khefu | akukho khefu | |
| Amandla acinezelayo | 90N/mm² | 120N/mm² | HBS00-60N/mm² |
| Imodyuli ye Ukolula | 1500N/mm² | 3000N/mm² | 70.000N/mm² |
| Tensile strength | 25-35N/mm² | 80-90N/mm² | 180N/m㎡ |
| Temp.Ukumelana | -30+90%C | 40-+120C | 300℃ |
| Umbala | luhlaza | mnyama |
IKHOWUDI YE-ORDER
Iikhowudi zomyalelo wecandelo elinye kunye nezixhobo zinenkqubo yeyunithi yazo zonke iiseries, ezihluka kuphela kwikhowudi yochungechunge.
OKUCETYIWEYO UMDA WOKUFAKWA KWEBANZO
Umbhobho od | Imigama yeeclamps |
6-14 | 0.9 |
15-22 | 1.2 |
23-28 | 1.5 |
30-38 | 2 |
40-48.3 | 2.5 |
50-57 | 3 |
60.3-70 | 3.4 |
73-88.9 | 3.7 |
90-108 | 4 |
114.3-133 | 4.3 |
140-165.1 | 5 |
168.3-220 | 5.5 |
219.1-323.9 | 6.5 |
356-406 | 7.5 |
Xa i-elbow okanye i-bend ukuze ixhaswe yi-clamps, i-clamps kufuneka ifakwe kwi-pos-itioned ngokusondeleyo ngokunokwenzeka kwicala ngalinye le-bend.
UMYALELO WENTLANGANISO
Indibano kwiipleyiti zentsimbi Weld metal welding plates on to the weight adjusted base.Clip isiqingatha esisezantsi se-clamp kwi-welding plate kwaye ufake ityhubhu; Emva koko yongeza isiqingatha sesibini sokubamba kwaye uqinise ngezikrufu ezinikiweyo. UNGAWUSHISI ngesibambiso seplastiki kwindawo!
masidityaniswe ngokujijwa ngesibiyeli sokubopha. Faka amandongomane kaloliwe kumzila kaloliwe kwaye ujike kangangoko uya kuhamba.
Indibano yokwakha
I-Weld kwi-welding plate okanye inkxaso kaloliwe, okanye ujike ngesibiyeli sokulungisa. I-Wedge kwi-clamp-half esezantsi, faka ityhubhu, yongeza i-clamp-isiqingatha esiphezulu kwaye uqinise ngezikrufu zokulungisa. Emva koko faka iqhosha lesibini letyhubhu ngendlela efanayo.
INdibano yemibhobho egobileyo
Xa udibanisa i-elbow, kufuneka ilungiswe ngokuthe ngqo kunye neentambo zombhobho ezinobuchule ngaphambili nasemva kwe-elbow. Kucetyiswa ukuba amanqaku anjalo axhasayo kufuneka abe kwindawo ezinzileyo.
Ukuqinisa i-torque yeebholiti kunye ne-axial clamping force kumbhobho
I-clamping force ye-shaft kumbhobho (ngokwe-DIN 3015 inxalenye ye-10) yixabiso eliphakathi, elibalwe kumaxabiso eemvavanyo ezi-3. Ngethuba lovavanyo, ipayipi yensimbi ye-St37 ngokwe-DIN 2448 isetyenziswe. Iqondo lobushushu laliyi-23C kwaye kwakukho ukungqubana okumileyo kumbhobho. Umbhobho ongaphakathi kwi-clamp awuyi kutyibilika xa uphantsi koluhlu lovavanyo lwamandla (F) kwicala le-axial lombhobho.
Uluhlu olukhanyayo | |||||
Ubungakanani series | Ukulungisa iibholithi GB5782-86 | Polypropylene | Inayiloni 6 | ||
Itorque yokuqinisa ibholt (Nm) | Amandla okubamba umbhobho F(KN)) | Itorque yokuqinisa ibholt (Nm)m) | Amandla okubamba umbhobho F(KN) | ||
0 | M6 | 8 | 0.6 | 10 | 0.6 |
1 | 8 | 1.1 | 10 | 0.7 | |
2 | 8 | 1.3 | 10 | 0.8 | |
3 | 8 | 1.4 | 10 | 1.6 | |
4 | 8 | 1.5 | 10 | 1.7 | |
5 | 8 | 1.9 | 10 | 2.0 | |
6 |
| 2.0 | 10 | 2.5 | |
