IZIMPAHLA EZITHILE
| Izakhiwo | I-Polypropylene(PP) | I-Polyamide 6(PA 6) | I-aluminium |
| Ukuminyana | 0.906 g/cm² | 1.12-1.15 g/cm² | 2.65 g/cm² |
| I-Flexural Deflection | 36N/mm² | 130---200N/mm² | 70N/mm² |
| Ukumelana Nomthelela | akukho khefu | akukho khefu | |
| Amandla Acindezelayo | 90N/mm² | 120N/mm² | I-HBS00-60N/mm² |
| I-modulus ye I-Elasticity | 1500N/mm² | 3000N/mm² | 70.000N/mm² |
| Amandla Okuqina | 25-35N/mm² | 80-90N/mm² | 180N/m㎡ |
| Temp.Ukumelana | -30+90%C | 40-+120C | 300 ℃ |
| Umbala | eluhlaza | mnyama | |
IKHODI YE-ODA
Amakhodi e-oda ezingxenye ezizodwa kanye nezinsiza anesistimu yeyunithi yalo lonke uchungechunge, oluhluka kuphela kukhodi yochungechunge.
AMADITA ANCANYWAYO OKUFAKA I-CLAMP
Ishubhu od | Amabanga ama-clamps |
6-14 | 0.9 |
15-22 | 1.2 |
23-28 | 1.5 |
30-38 | 2 |
40-48.3 | 2.5 |
50-57 | 3 |
60.3-70 | 3.4 |
73-88.9 | 3.7 |
90-108 | 4 |
114.3-133 | 4.3 |
140-165.1 | 5 |
168.3-220 | 5.5 |
219.1-323.9 | 6.5 |
356-406 | 7.5 |
Lapho indololwane noma ukugoba ukuze kusekelwe ama-clamps, ama-clamps kufanele abekwe eduze ngangokunokwenzeka ohlangothini ngalunye lokugoba.
UMYALELO WOMHLANGANO
Hlanganisa ezingcwecweni zokushisela zensimbi Shisela amapuleti okushisela ensimbi esisekelweni esilungisiwe esisindisi.Sika ingxenye engezansi yesigxobo uyifake epuleti lokushisela bese ufaka ishubhu; bese wengeza ingxenye yesibili yokuqinisa bese uqinisa ngezikulufo ezinikeziwe. UNGAWUSHISI ngesibambiso sepulasitiki esisendaweni!
zishiselwe ngesikulufi ngobakaki wokubopha. Faka amantongomane kaloliwe ujantshi bese ujika lapho uzohamba khona.(Qinisekisa ukuthi isikhala silungile). Wedge engxenyeni engezansi yokuqinisa, faka ishubhu, engeza isigamu sesibili sokubopha bese uqinisa ngezikulufo ezinikeziwe.
Umhlangano wokwakha
Weld epuleti lokushisela noma ukwesekwa kukaloliwe, noma faka isikulufa ngobakaki wokulungisa. I-Wedge engxenyeni engezansi yokuqinisa, faka ishubhu, engeza uhhafu wokubamba ongenhla bese uqinisa ngezikulufo zokulungisa. (Ukulungisa isikulufu ukuze uphume.)Ngokufaka ipuleti lokukhiya engxenyeni engenhla ye-clamp, isikulufu sokulungisa siyavinjelwa ukuthi singasonti. Bese ufaka i-clamp yesibili yeshubhu ngendlela efanayo ncamashi.
Ukuhlanganiswa kwamapayipi agobile
Lapho uhlanganisa indololwane, kufanele ilungiswe ngokuqondile ngezinsimbi zamapayipi ezinekhono ngaphambili nangemuva kwendololwane. Kunconywa ukuthi amaphuzu anjalo okusekela kufanele abe ezindaweni ezingaguquki.
I-torque eqiniswayo yamabhawodi namandla e-axial clamping epayipini
Amandla okugoqa we-shaft epayipini (ngokusho kwe-DIN 3015 ingxenye 10) yinani eliphakathi, elibalwa kusukela kumanani okuhlolwa oku-3. Ngesikhathi sokuhlolwa, kusetshenziswe ipayipi lensimbi le-St37 ngokusho kwe-DIN 2448. Izinga lokushisa lalingu-23C futhi kwakukhona ukungqubuzana okumile epayipini. Ipayipi elingaphakathi kwe-clamp ngeke lishelele uma lingaphansi kwamandla okuhlola asohlwini (F) ohlangothini lwe-axial lwepayipi.
Uchungechunge olukhanyayo |
Uchungechunge losayizi | Ukulungisa amabhawodi I-GB5782-86 | I-Polypropylene | Inayiloni 6 |
Itorque yokuqinisa ibholidi (Nm) | I-Pipe clamping force F(KN)) | Itorque yokuqinisa ibholidi (Nm)m) | Amandla okuqinisa amapayipi F(KN) |
0 | M6 | 8 | 0.6 | 10 | 0.6 |
1 | 8 | 1.1 | 10 | 0.7 |
2 | 8 | 1.3 | 10 | 0.8 |
3 | 8 | 1.4 | 10 | 1.6 |
4 | 8 | 1.5 | 10 | 1.7 |
5 | 8 | 1.9 | 10 | 2.0 |
6 | | 2.0 | 10 | 2.5 |
