01
Tube Clamps
MATERIAL PROPERTIES
| Cov khoom | Polypropylene (PP) | Polyamide 6 (PA 6) | Ib lub luminium |
| Qhov ntom | 0,906 g/m² | 1.12-1.15 g / cm² | 2.65 g / cm² |
| Flexural Deflection | 36N / hli | 130--200N / hli | 70N / hli |
| Impact Resistance | tsis tawg | tsis tawg | |
| Compressive zog | 90N / hli | 120N / hli | HBS00-60N/mm² |
| Modulus ntawm Elasticity | 1500N / hli | 3000N / hli | 70,000 N/mm² |
| Tensile zog | 25-35N / hli | 80-90N / hli | 180N / m ㎡ |
| Temp.Resistance | -30 + 90% C | 40 - + 120 C | 300 ℃ |
| Xim | ntsuab | dub |
TXOJ CAI
Cov lej txiav txim rau ib qho thiab cov khoom siv muaj ib lub kaw lus rau txhua lub koob, uas tsuas yog sib txawv hauv cov lej code.
NYEEM NTXIV RAU HAUV INSTALLATION NTAWM CLAMP
cev od | Qhov deb ntawm clamps |
6–14 | 0.9 |
15-22 | 1.2 |
23-28 | 1.5 |
30-38 : kuv | 2 |
40-48.3 Nws | 2.5 |
50-57 : kuv | 3 |
60.3-70 | 3.4 |
73-88.9 Nws | 3.7 |
90-108 : kuv | 4 |
114.3-133 | 4.3 |
140-165.1 | 5 |
168.3-220 | 5.5 |
219.1-323.9 | 6.5 |
356-406 : kuv | 7.5 |
Thaum lub luj tshib lossis khoov kom tau txais kev txhawb nqa los ntawm cov clamps, cov clamps yuav tsum tau pos-itioned kom ze li sai tau ntawm txhua sab ntawm qhov khoov.
ASSEMBLY IB TUG
Sib dhos rau cov hlau vuam daim hlau Weld hlau vuam daim hlau rau ntawm qhov hnyav hloov lub hauv paus.Clip qis ib nrab ntawm clamp rau vuam phaj thiab ntxig raj; tom qab ntawd ntxiv ob lub clamp-ib nrab thiab nruj nrog cov ntsia hlau muab. TSIS TXHOB welded nrog yas clamp nyob rau hauv txoj hauj lwm!
yuav tsum tau welded ntawm screwed rau nrog ib tug fastening bracket. Ntxig cov txiv ntseej rau hauv kev tsheb ciav hlau thiab tig kom deb li deb li nws yuav mus.(Nco ntsoov tias qhov sib nrug yog txoj cai). Wedge ntawm qis clamp-ib nrab, ntxig lub raj, ntxiv ob lub clamp-ib nrab thiab nruj nrog screws muab.
Kev tsim kho kev sib dhos
Weld ntawm vuam phaj los yog kev txhawb nqa kev tsheb nqaj hlau, los yog ntsia hlau rau nrog kev kho bracket. Ntxig rau ntawm qis clamp-ib nrab, ntxig lub raj, ntxiv lub clamp-ib nrab thiab nruj nrog kev kho cov ntsia hlau.(Kho cov ntsia hlau kom jut tawm.) Los ntawm kev siv lub xauv phaj rau sab sauv ib nrab ntawm lub clamp, kho cov ntsia hlau yog tiv thaiv los ntawm kev sib tw. Tom qab ntawd mount ob lub raj clamp nyob rau hauv raws nraim tib txoj kev.
Kev sib dhos ntawm cov kav dej khoov
Thaum sib dhos lub luj tshib, nws yuav tsum tau kho ncaj qha nrog cov yeeb nkab clamps ntawm lub hauv ntej thiab nram qab ntawm lub luj tshib. Nws raug pom zoo tias cov ntsiab lus txhawb nqa yuav tsum nyob rau hauv txoj haujlwm ruaj khov.
Tightening torque ntawm bolts thiab axial clamping quab yuam ntawm cov yeeb nkab
Lub clamping quab yuam ntawm cov ncej ntawm cov yeeb nkab (raws li DIN 3015 ntu 10) yog tus nqi nruab nrab, uas yog xam los ntawm qhov tseem ceeb ntawm 3 qhov kev xeem. Thaum lub sij hawm xeem, ib tug St37 steel yeeb nkab raws li DIN 2448 tau siv. Qhov kub yog 23C thiab muaj kev sib txhuam zoo li qub ntawm cov yeeb nkab. Cov yeeb nkab nyob rau hauv lub clamp yuav tsis swb thaum raug rau ib qho kev xeem quab yuam (F) nyob rau hauv axial kev taw qhia ntawm cov yeeb nkab.
Lub teeb series | |||||
Loj series | Kho bolts GB5782-86 | Polypropylene | Nylon 6 | ||
Bolt zawm torque (Nm) | Cov yeeb nkab clamping quab yuam F (KN)) | Bolt zawm torque (Nm) | Cov yeeb nkab clamping quab yuam F (KN) | ||
0 | M6 | 8 | 0.6 | 10 | 0.6 |
1 | 8 | 1.1 | 10 | 0.7 | |
2 | 8 | 1.3 | 10 | 0.8 ua | |
3 | 8 | 1.4 | 10 | 1.6 | |
4 | 8 | 1.5 | 10 | 1.7 | |
5 | 8 | 1.9 | 10 | 2.0 | |
6 |
| 2.0 | 10 | 2.5 | |
