01
Tube Clamps
ALA ALA
| Njirimara | Polypropylene (PP) | Polyamide 6 (PA 6) | Aluminium |
| Njupụta | 0.906 g/cm² | 1.12-1.15 g/cm² | 2.65 g/cm² |
| Mgbanwe mgbanwe | 36N/mm² | 130---200N/mm² | 70N/mm² |
| Nguzogide mmetụta | enweghị ezumike | enweghị ezumike | |
| Ike mkpakọ | 90N/mm² | 120N/mm² | HBS00-60N/mm²² |
| Modul nke Ngbanwe | 1500N/mm² | 3000N/mm² | 70.000N/mm²² |
| Ike ọdụdọ | 25-35N/mm² | 80-90N/mm² | 180N/m |
| Okpomọkụ. Nguzogide | -30+90%C | 40-+120C | 300 ℃ |
| Agba | akwụkwọ ndụ akwụkwọ ndụ | nwa |
Koodu iwu
Koodu iwu maka otu akụkụ na ngwa nwere sistemu otu maka usoro niile, nke na-agbanwe naanị na koodu usoro.
AKWỤKWỌ NDỊ KWESỊRỊ KA MAKA KWESỊRỊ MKWADO
Tube od | Anya nke clamps |
6-14 | 0.9 |
15-22 | 1.2 |
23-28 | 1.5 |
30-38 | 2 |
40-48.3 | 2.5 |
50-57 | 3 |
60.3-70 | 3.4 |
73-88.9 | 3.7 |
90-108 | 4 |
114.3-133 | 4.3 |
140-165.1 | 5 |
168.3-220 | 5.5 |
219.1-323.9 | 6.5 |
356-406 | 7.5 |
Mgbe ikiaka ma ọ bụ gbagọ iji kwado ya, ihe nkedo ahụ kwesịrị ka edobere ya ka ọ dị nso dịka o kwere mee n'akụkụ ọ bụla nke gbagọ.
Ntụziaka ọgbakọ
Mgbakọ na na metal ịgbado ọkụ efere Weld metal ịgbado ọkụ efere na a arọ gbanwee base.Clip ala ọkara nke mwekota na ịgbado ọkụ efere na fanye tube; wee tinye nke abụọ mwekota-ọkara na ikesie na kposara nyere. AKWỤKWỤKWỤKWỌ plastic mwekota na ọnọdụ! Mgbakọ na ụgbọ okporo ígwè na-akwado ụgbọ okporo ígwè nwere ike.
a ga-eji ihe nkwado kụchie ya. Tinye mkpụrụ osisi n'ime ụgbọ okporo ígwè ma tụgharịa ruo ka ọ ga-aga. (Jide n'aka na spacing ziri ezi) . Wedge na obere mwekota-half, fanye tube, tinye nke abụọ mwekota-ọkara na ikesie na kposara nyere.
Mgbakọ ihe owuwu
Weld na efere ịgbado ọkụ ma ọ bụ nkwado ụgbọ okporo ígwè, ma ọ bụ jiri ihe ndozi kwụchie ya. Wedge na obere mwepu-ọkara, tinye tube, gbakwunye mgbanaka elu-ọkara ma mee ka ọ dị ike na-edozi ihe nkedo. Mgbe ahụ, bulie nke abụọ tube mwekota n'otu ụzọ ahụ kpọmkwem.
Mgbakọ nke ọkpọkọ agbagọ
Mgbe ị na-agbakọta ikpere ụkwụ, a ga-edozi ya ozugbo na ọkpọkọ ọkpọkọ nke ọma n'ihu na azụ nke ikpere ụkwụ. A na-atụ aro na isi ihe nkwado dị otú ahụ kwesịrị ịdị n'ọnọdụ ndị a kwadoro.
Mkpịsị aka ike nke bolts na ike axial clamping na ọkpọkọ
The clamping ike nke aro na ọkpọkọ (dị ka DIN 3015 akụkụ 10) bụ nkezi uru, nke na-agbakọ si ụkpụrụ nke 3 ule. N'oge ule, a na-eji a St37 ígwè ọkpọkọ dị ka DIN 2448. Okpomọkụ dị 23C ma enwere esemokwu kwụ ọtọ na ọkpọkọ. Ọkpụkpọ dị n'ime mkpọ ahụ agaghị amị amị mgbe etinyere ya na ike nnwale edepụtara (F) na ntụzịaka axial nke ọkpọkọ.
Usoro ọkụ | |||||
Usoro nha | Idozi bolts GB5782-86 | Polypropylene | Naịlọn 6 | ||
Ọkụ na-emesi ike nke Bolt (Nm) | Ike njigide ọkpọkọ F (KN)) | Ọkụ na-emesi ike (Nm) m) | Ike njigide ọkpọkọ F(KN) | ||
0 | M6 | 8 | 0.6 | 10 | 0.6 |
1 | 8 | 1.1 | 10 | 0.7 | |
2 | 8 | 1.3 | 10 | 0.8 | |
3 | 8 | 1.4 | 10 | 1.6 | |
4 | 8 | 1.5 | 10 | 1.7 | |
5 | 8 | 1.9 | 10 | 2.0 | |
6 |
| 2.0 | 10 | 2.5 | |
